Reviews & Guides

Write a guide

How To Unlock Your Ford Digital Display

by: stusellingonly( 4855Feedback score is 1000 to 4,999) Top 1000 Reviewer
8 out of 8 people found this guide helpful.
Guide viewed: 452 times Tags: Ford Display | Ka | Focus | Mondeo | Galaxy


Hello everybody.

Firstly, I must apologise to all those who have purchased these instructions from me over the past few months.

From May this year, Ebay revised their Downloadable Media Policy & decided to ban all digitally delivered items. This meant that the instructions that I have been successfully emailing to people were now banned from being delivered by email. I could have elected to print each set out & post them to buyers, but to be perfectly honest this would be both time consuming & an unnecessary use of resources (printer ink, paper, envelopes etc.) so I decided to simply stop listing in order to be a good boy & comply with the policies.

Unfortunately, not all members are as good at sticking to the rules as myself & several are still listing on a nudge, nudge, wink, wink, "I won’t actually state that I email the instructions even though I do" basis. This guide is dedicated to these members.

It would seem that the only way to make sure everybody sticks to the rules is to make sure that the information is made available to all, so rather than paying for the instructions to be emailed, here they are for free:

 

These instructions are applicable to:

Ford Ka / Streetka

Ford Puma

Ford Fiesta

Ford Fusion

Ford Focus

Ford Cougar

Ford Mondeo

Ford Galaxy (but NOT 2000 on models)

Instructions on how to unlock your digital display:

1. Have the engine running and press and hold the trip mileage reset button.

2.While holding down the trip mileage reset button turn the engine off.

3.Still with the trip mileage button held down start the engine.

4.After a couple of seconds the word ‘test’ will appear.

5.Now release the mileage reset button and use this to scroll through the various readings.

Alternative Procedure

1. Have the engine running and press and hold the trip mileage reset & unit buttons.

2.While holding down the 2 buttons turn the engine off.

3.Still with the 2 buttons held down start the engine.

4.After a couple of seconds the word ‘test’ will appear.

5.Now release the mileage reset button, then the unit button and use this to scroll through the various readings.

Functions
1 Gauge Test
2 Dial Test
3 Bulb Test
4 Diagnostic Check
5 Diagnostic Check
6 Clock Type (shows ?date 44? if UK)
7 Diagnostic Check
8 Speed MPH
9 Speed KPH
10 Revs
11 Fuel
12 Engine Type
13 Temp of Engine
14 Battery Voltage
15 Diagnostic Check
16 LCD Display
Diagnostic Check (18-30)

Alternative list of functions:

* 1.Shows a Gauge Sweep
* 2. Shows all 8's on the LCD (LCD TEST)
* 3. Illuminates all the bulbs on the dash
* 4. Displays hexadecimal value for ROM level
* 5. Displays the hexadecimal value for EE level
* 6. Shows DTC (Diagnostic Trouble Code)
* 7. Digital Speedometer - mph
* 8. Digital Speedometer - kph
* 9. N/A
* 10. Digital tachometer
* 11.Fuel volume
* 12. Engine coolant temperature
* 13. Battery voltage
* 14. ABS fail
* 15. Electronic brake distribution (EBD) failure
* 16. Illumination
* 17. Crank Sensor

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


Guide ID: 10000000007277872Guide created: 25/05/08 (updated 07/10/08)

 
Was this guide helpful? Report this guide

Ready to share your knowledge with others? Write a guide




About eBay | Announcements | Safety Centre | Partner Centre | VeRO Protecting IP | Policies | Feedback Forum | Site Map | Help
Copyright © 1995-2008 eBay Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the eBay User Agreement and Privacy Policy.
eBay official time