Hello everybody.

Firstly, I must apologise to all those who have purchased these instructions from me over the past few months.

From May this year, Ebay revised their Downloadable Media Policy & decided to ban all digitally delivered items. This meant that the instructions that I have been successfully emailing to people were now banned from being delivered by email. I could have elected to print each set out & post them to buyers, but to be perfectly honest this would be both time consuming & an unnecessary use of resources (printer ink, paper, envelopes etc.) so I decided to simply stop listing in order to be a good boy & comply with the policies.

Unfortunately, not all members are as good at sticking to the rules as myself & several are still listing on a nudge, nudge, wink, wink, "I won’t actually state that I email the instructions even though I do" basis. This guide is dedicated to these members.

It would seem that the only way to make sure everybody sticks to the rules is to make sure that the information is made available to all, so rather than paying for the instructions to be emailed, here they are for free:

Procedure

1. Remove the lower crash panel (usually the piece of trim below the steering wheel & above the pedals) and locate the Remote control receiver unit. If it is not there, try behind the small piece of trim in front of the door opening (often referred to as the kick panel).

2. The switch on the side of the unit should be switched to the SET position.

3. Press the Door lock button or unlock button on the Transmitter quickly.

4. Return the switch to OFF position and then test remote control.

Programming remotes on 16 pin OBD Systems

Procedure

1. Locate the small black box below the steering column for remote function.

2. Remove the small piece of tape to uncover a hole with a switch inside.

3. With the ignition on, move the switch to the SET position.

4. Press the button on ALL remotes needed for the vehicle.

5. Return the switch to the OFF position.

6. Switch off the ignition and test all remotes.

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx