Nokia 3230 Housing Change/Disassembly Instructions : eBay Guides

An easy change if you're looking to replace your Nokia 3230 housing. You will require a Torx T6 screwdriver which is a specialist tool for mobile phones (available from us).

Steps:

1) Remove rear battery cover, which just slides off.

2) Using a plastic shim, apply moderate pressure underneath the top cover to unclip it. (Note: Do not use a sharp object). Remove the top cover.

3) Locate the 4 screws on each corner underneath the rear cover. Unscrew them using the screwdriver and keep them in a safe place as you will need them again.

4) Use the plastic shim to seperate the front cover from the phone chassis.

5) Replace the front cover with the new front cover. Apply pressure to make sure it clips into the frame.

6) Re-apply the screws with the Torx T6 screwdriver.

7) Re-apply the top cover.

8) Replace battery cover with the new one.