Basket
( 
)
Here are some instructions for the fitting of Nokia 6280 Facia. This is
a very straightforward procedure for a slide phone thanks in no part of
not having to transfer the slide assembly.
Steps:
1) Remove the battery cover and battery from the phone.
2) Using a plastic implement or similar, seperate the front cover at the top of the phone. Once the top cover comes off, the top keypad section will also seperate from the phone, as this is not connected unlike the lower part.
3) Replace the front housing with the new one - make sure the keypad is properly aligned with the contacts. Clip this down into place and make sure it is secure.
4) Replace battery and rear cover.
Steps:
1) Remove the battery cover and battery from the phone.
2) Using a plastic implement or similar, seperate the front cover at the top of the phone. Once the top cover comes off, the top keypad section will also seperate from the phone, as this is not connected unlike the lower part.
3) Replace the front housing with the new one - make sure the keypad is properly aligned with the contacts. Clip this down into place and make sure it is secure.
4) Replace battery and rear cover.
Guide created: 15/11/07 (updated 05/04/11)
Thank you for voting. If your vote meets our 
+!~~_6.JPG?set_id=89040003C1)
rwCWM~$(KGrHqIOKj!EwRKUcPseBMJ2QrIN0Q~~_6.JPG?set_id=89040003C1)
C8!BM+KDH4mW!~~_6.JPG?set_id=89040003C1)
H2Q~~_6.JPG?set_id=89040003C1)
